Datavideo Digital Video Converter DAC-100 User Manual

DAC-1003RCA VIDEO & AUDIO CABLES-VIDEO CABLE 1AC ADAPTERAC ADAPTERS-VIDEO CABLE(REQUIRES RED & WHITE RCA AUDIO CABLE)RCA VIDEO & AUDIO CAB

C. Initial Software configuration Configuring a DAC-100 with Avid DV Xpress 3.5 on Windows XP Screen 1 above shows a typical desktop in Xpress DV

Note: The DAC-100 uses the same deck configuration setting as the DAC-2

Using the Record Tool with the DAC-100 in Xpress DV 3.5

Audio Bit Rate SelectorInput SelectorSource IndicatorAudioBit Rate IndicatorS-VideoInputComposite Video InputLeft Audio InputRight Audio InputS-Video

FRONT (Input)CAPTURING 3How to connect DAC-100 to capture Video from a VCR or Camcorder1. Connect the RCA Video/audio cables from the VCR’s Line outp

CAPTURING 41. Connect the S-Video cable and RCA audio cables from the VCR’s Line output to the input on the DAC-100. 2. Connect the FireWire cable t

EXPORTING TO Set to “AV”PUSHPUSHSet to “16 bit”51. Connect the RCA Video/audio cables from the VCR’s Line input to the output on the DAC-100. 2. Con

EXPORTING TO ( )61. Connect the S-Video and RCA audio cables from the VCR’s Line input to the output on the DAC-100. 2. Connect the FireWire cable

DAC-100 Quick Setup with Avid Xpress DV 3.5 on Windows This setup guide will cover four specific areas: A. Explanation of the DAC-100 Dip Switches

B. Configuration of the Dip Switches In this section, we will select the appropriate settings for your particular operating system and 1394/firewire

C. Diagrams of typical cable connections Make sure your VCR or Analog source is connected to the front inputs of the DAC-100 (LED’s are on the front