DataVideo TLM-70D User Manual download pdf (Page 7)

9. AUX Video Input (D-Sub 9-Pin):

An additional video input terminal with RGB and Sync input interface. Connect the

Pin 7 to Ground (Short the Pin 7 & 8) to activate this interface and turn on the 12VDC

power output on Pin 1 & 6.

 PIN 1: 12VDC 300mA output

 PIN 2: Video “R”Input

 PIN 3: Video “G”Input

 PIN 4: Video “CV_Sync”Input

 PIN 5: Video “B”Input

 PIN 6: 12VDC 300mA output

 PIN 7: SDI Switch (Connect to Ground to enable RGB Input of Pin 2-5)

 PIN 8: Ground

 PIN 9: Ground

10. DIP Switch setting for DV Input mode select

Please refer to the setting below for proper operation.

(See Note 1 below)

 S1. PAL or NTSC (PAL-ON, NTSC-OFF)

 S2. NTSC setup level 7.5 IRE / 0 IRE (ON: 0 IRE, OFF: 7.5 IRE). (See Note 2 below)

 S3. Locked Audio (OFF: Locked Audio, ON: Unlocked Audio, factory default)

 S4 & S5 setting for different PC Operation System

 S6. Factory setting (OFF), please do not change.

*. Note 1: Reboot TLM-70D if you change a DIP Switch

Turn-on TLM-70D before launching any NLE software

*. Note 2: NTSC 0 IRE is most often used in Japan

NTSC 7.5 IRE is used elsewhere

*. PAL Video is always at 0 IRE mode

*. Note 3: To work with a DV source from MAC with Final Cut Pro:

1). Select "Preferences" from Final Cut Pro menu

2). Select "General" page

3). Uncheck "Abort capture on dropped frame"

4). Uncheck "Abort capture on time code break" for Final cut pro

5). Click OK button

ON MAC OS (See Note 3 below)

S5 ON S4

OFF Windows 2000 and Windows 98

ON Windows XP and Windows ME

S5 OFF S4

OFF DV Camera mode

1 2 3 4 5 6 7 8 9 10 11

No comments

DataVideo TLM-70D User Manual Page 7