DataVideo MP-6000MD Instruction Manual

Medical DVD Recorder MP-6000MD Instruction Manual REV 021205

Pause/Play a Title/Track Press Title button, it will go to the track list of the disc. Press it again; it will go back to the video clip you were pl

6. SYSTEM SETUP: a. Set time: Manually set up timing. b. System info.: Check system information. c. Factory Reset: Return all settings to Factory

Functions: Rear Panel DIP switch DIP switch 1 OFF, •External device control by GPI trigger. DIP switch 1 ON (When this function is turned on, the

Black Burst output terminal for video monitoring Component Y.U.V. Video output terminal. Component Y.U.V. Video input terminal. Composite Video &a

Installation The following are simple examples of how to integrate the MP-6000MD into any video setup. Obviously there are too many possible combinati

3. Connecting Y/C or Composite video and stereo audio outputs from an analogue camcorder or DVD player to the MP-6000MD. 4. Connecting a DV (IEEE13

Quick Start Guide: As the heading suggests, this is the quick start section. If you require more detailed operating instructions please go to page 18.

a. Press the “MENU” button once, choose '”2.COLOR CORRECTION”, then press the “ENTER” button. Use the Up and Down arrow buttons to move to differ

Note: While finalizing the disc, all buttons on the front panel are inactive. Do not turn off the power, during finalization as disc damage may occur.

Setting Up Connecting Hopefully you have read the installation chapter, and you’ve studied the diagrams on pages 12 – 14. With your chosen source and

Table of contents Warnings and Precautions -----------------------------------------------------------------------------------3 Mains Lead (Europe / U

LCD Display The LCD on the front panel of the MP-6000MD displays various forms of information. Here are some of the many examples Displayed when first

Setting the Time & Date With the MP-6000MD powered up the LCD display should be displaying No Disc Press the Menu Button. The LCD Display should

Press the Right Arrow button to highlight Set Time. Press the Right Arrow button again to highlight Manual. Press the Enter button to open the T

Press the Left Arrow button to highlight Set Time Press the Down Arrow button 3 times, until Quit is highlighted. Press the Right Arrow button t

Setting the Video Input The MP-6000MD has four Video Input options; Composite Video, S-Video, Component Video (Y U V) and DV (DIGITAL) (IEEE 1394). Th

Setting the Record Quality The MP-6000MD has five Recording Quality options HQ, SP, LP, EP, SLP. The Selected option is displayed in two ways. LCD Dis

Recording a Disc With the Video Input selected and the Record Quality selected you are now ready to make a recording. Inserting a Disc It is most imp

After a few seconds the message will change to READING, and after a few more seconds it will return to the general display. DVD+RW Press the Eje

Recording from an Analogue Source If you are recording from a tape start the tape playing, the video image should appear on the TV monitor connected t

Recording from a DV IEEE1394 (Digital) Source If you are recording from a DV tape, the MP-6000MD offers device control via the IEEE 1394 cable. Wit

Reviewing a Recording------------------------------------------------------------------------------- 29 Finalizing a DVD+R Disc-----------------------

The LCD should go to the Record Display and On-Screen the Device Control display will be replaced by a Rec indicator, such as this: LCD Display On-Sc

Each track has a data panel next to it which gives details of the Video Source, the date & time it was recorded, the length of the track in H:MM:S

Use the Right Arrow button to highlight CONFIRM And then press the Enter button The Finalize process will start. The LCD display will show the Fina

Finalizing a DVD+RW Disc (Make Compatible) Strictly speaking an RW disc doesn’t get finalized, since it is always possible to erase and re-record. The

Editing a Title It is possible to edit the Title Description and the Icon of each Title. This can only be done before the disc has been finalized; onc

On the TV monitor the Title Editing Panel will appear Use the Up, Down, Left and Right Arrow buttons to highlight the required letter and press the E

After a few seconds the updated Track List will appear with the new description in place. Press the Menu button to exit the Edit Title mode and return

Use the Control Buttons to find the image you would like to use as the Icon. You can use picture search forward \ reverse, play, pause etc. Once you

Color Correction If the image from the video source is in need of adjustment the MP-6000MD has a built in video processor, it can adjust the Brightnes

To access other options press the Down Arrow button to select Contrast, Color and Tint (Tint is NTSC only) The procedure for setting Contrast, Col

Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this

Setting the Video Standard (PAL/NTSC) The MP-6000MD can be set to PAL or NTSC. Generally if the unit is bought it Europe it will be set to PAL as a de

Dip Switch 1 switches the MP-6000MD between simple GPI control and RS 232 control. If Dip Switch 1 is Off (up) the MP-6000MD responds to GPI, if it is

The GPI Function can be set to either control Play & Pause or Record & Pause. To select the GPI Function you require, start with the LCD Displ

After a few seconds the message will change to READING, and after a few more seconds it will return to the general display. On the TV monitor you w

Erasing the Last Title from a DVD+RW Disc With a DVD+RW disc it is possible to remove the last recorded title from the disc without erasing the whol

At the bottom of the list we can see there is 88% of free space available on the disc, and above that we can see title eight. Press the Menu button

Once completed you will see that eight has been removed and the free space on the disc has increased. You can remove further tracks by following the s

Now use the Down Arrow button to navigate down to Factory Reset Press the Right Arrow button to highlight Start Press the Enter button to confirm

Use the Up, Down Left and Right Arrow buttons to navigate and set the date and time Then use the Right Arrow button to highlight save, and press the

Specifications Selectable Video Standards NTSC/PAL DV Input Two 6-PIN IEEE1394 Fire Wire Ports with DC12V Bus Power

AC Mains Leads in Europe FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. In Europe this product may be supplied with 2 types of AC mains cab

Service and Support It is our goal to make your products ownership a satisfying experience. Our support team is available to assist you in setting up

CAUTION: This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this d

What’s in the Package The following is a packing list, if any items are missing from your box please contact your dealer immediately. Item Descriptio

Cleaning To clean the unit, remove the power cord and use a soft dry or slightly damp cloth. Do not use liquid or aerosol cleaners. Use of alcohol, th

Functions: Front Panel Power On / Off Fast Rewind Mode at 2X,4X,8X,16X,30X,60X,100X speed Fast Forward Mode at 2X,4X,8X,16X,30X,60X,100X speed